RSS

AT 2257 ELECTRONICS AND MICROPROCESSORS LAB MANUAL


AT 2257 ELECTRONICS AND MICROPROCESSORS LAB MANUAL

OBJECTIVE
To supplement the theoretical knowledge with practical use of electronic components and
programming and control using micro-processors

 LIST OF EXPERIMENTS

 ELECTRONICS
VI Characteristics of PN Junction Diode
VI Characteristics of Zener Diode
Characteristics of CE Transistor
Characteristics of JFET
Characteristics of Uni Junction Transistor
RC or Wein Bridge Oscillator
Study of Logic Gates (Basic Gates)
Half Adder and Full Adder
Shift Registers and Counters
Operational Amplifier (Adder, Subtractor, Differentiator, Integrator, Inverting and Non - Inverting

 MICROPROCESSORS
Block Transfer
8 bit Addition, Subtraction
Multiplication and Division
Maximum and Minimum of block of data
Sorting
Stepper Motor Interfacing

Continue Reading... Labels:


AT2256 COMPUTER AIDED MACHINE DRAWING LAB MANUAL


AT2256 COMPUTER AIDED MACHINE DRAWING LAB MANUAL
(Common to Automobile & Production) 

 1. Drawing of automobile components such as piston, connecting rod, valves,
manifold and crank shaft.
2. Assembly drawing of screw jack, piston – connecting rod assembly, valve
assembly, clutch assembly and gear box assembly.
Thank you for visiting this site. For more details about engineering click here


If you have any problem to download this file just leave mail or message for vetrivel13991@gmail.com .
Continue Reading... Labels:


AT2255 ENGINE PERFORMANCE AND EMISSION TESTING LAB MANUAL


AT2255 ENGINE PERFORMANCE AND EMISSION TESTING LAB MANUAL

 LIST OF EXPERIMENTS
1. Study of hydraulic, electrical and eddy current dynamometers
2. Valve timing and port timing diagram
3. Performance and emission test on two wheeler SI engine
4. Performance and emission test on automotive multi-cylinder SI engine
5. Performance and emission test on automotive multi-cylinder CI engine
6. Retardation test on I.C. Engines.
7. Heat balance test on automotive multi-cylinder SI engine
8. Heat balance test on automotive multi-cylinder CI engine
9. Morse test on multi-cylinder SI engine
10. P-θ and P-V diagrams for IC engine with piezo-electric pick up, charge
amplifier, angle encoder and PC
Thank you for visiting this site. For more details about engineering click here


If you have any problem to download this file just leave mail or message for vetrivel13991@gmail.com .
Continue Reading... Labels:


EE2208 MEASUREMENTS AND INSTRUMENTATION LABORATORY MANUAL


EE2208 MEASUREMENTS AND INSTRUMENTATION LABORATORY  MANUAL

AIM
The aim of this lab is to fortify the students with an adequate work experience in the measurement of
different quantities and also the expertise in handling the instruments involved.

OBJECTIVE
To train the students in the measurement of displacement, resistance, inductance, torque and angle etc., and to give exposure to AC, DC bridges and transient measurement.


Study of displacement and pressure transducers AC bridges.
DC bridges.
Instrumentation amplifiers. A/D and D/A converters.
Study of transients.
Calibration of single-phase energy meter. Calibration of current transformer.
Measurement of three phase power and power factor.

10. Measurement of iron loss.

Continue Reading... Labels:


EE2209 DATA STRUCTURES AND ALGORITHMS LABORATORY MANUAL


EE2209 DATA STRUCTURES AND ALGORITHMS LABORATORY MANUAL

AIM:
To develop skills in design and implementation of data structures and their applications.
1. Implement singly and doubly linked lists.
2. Represent a polynomial as a linked list and write functions for polynomial addition.
3. Implement stack and use it to convert infix to postfix expression
4. Implement array-based circular queue and use it to simulate a producer-consumer problem.
5. Implement an expression tree. Produce its pre-order, in-order, and post-order traversals. 6. Implement binary search tree.
7. Implement insertion in AVL trees.
8. Implement priority queue using heaps
9. Implement hashing techniques
10. Perform topological sort on a directed graph to decide if it is acyclic.
11. Implement Dijkstra's algorithm using priority queues
12. Implement Prim's and Kruskal's algorithms
13. Implement a backtracking algorithm for Knapsack problem
14. Implement a branch and bound algorithm for traveling salesperson problem
15. Implement any randomized algorithm.

Continue Reading... Labels:


EE2207 ELECTRON DEVICES AND CIRCUITS LABORATORY MANUAL


EE2207 ELECTRON DEVICES AND CIRCUITS LABORATORY MANUAL

(B.E. (EEE), B.E. (E&I) and B.E. (I & C)
(Revised)

1. Characteristics of Semiconductor diode and Zener diode.
2. Characteristics of Transistor under common emitter, common collector and common base
configurations.
3. Characteristic of FET. 4. Characteristic of UJT.
5. Characteristics of SCR, DIAC and TRIAC.
6. Photo diode, phototransistor Characteristics and study of light activated relay circuit. 7. Static characteristics of Thermistors.
8. Single phase half wave and full wave rectifiers with inductive and capacitive filters.
9. Differential ampliers using FET.
10. Study of CRO.
11. Series and Parallel reasonance circuits. 12. 
Continue Reading... Labels:


AT2207 FLUID MECHANICS AND MACHINERY LAB lab manual


AT2207 FLUID MECHANICS AND MACHINERY LAB  lab manual
(Offered Automobile only)

LIST OF EXPERIMENT


Determination of the Coefficient of discharge of given Orifice and Venturi meter. Calculation of the rate of flow using Rota meter.
Determination of friction factor of given set of pipes.
Conducting experiments and drawing the characteristic curves of centrifugal pump/
submergible pump
Conducting experiments and drawing the characteristic curves of reciprocating pump.
Conducting experiments and drawing the characteristic curves of Gear pump.
Conducting experiments and drawing the characteristic curves of Pelton wheel.
Conducting experiments and drawing the characteristics curves of Francis
turbine.
Conducting experiments and drawing the characteristic curves of Kaplan turbine.
Flow visualization experiment on the effects of sharp corner and rounded corner
and add-on devices in automobiles
Drag estimation on models of automobiles of different shapes







Continue Reading... Labels:


AT2205 AUTOMOTIVE COMPONENTS LABORATORY lab manual


AT2205 AUTOMOTIVE COMPONENTS LABORATORY lab manual



Dismantling and study of Multi-cylinder Petrol Engine
Assembling of Multi-cylinder Petrol Engine
Dismantling and study of Multi-cylinder Diesel Engine
Assembling of Multi-cylinder Diesel Engine
Study of petrol engine fuel system
Study of diesel engine fuel system
Study and measurement of light and heavy commercial
Vehicle Frame

8. Study, dismantling and assembling of front and rear
Axles
9. Study, dismantling and assembling of differential
10. Study, dismantling and assembling of Clutch
11. Study, dismantling and assembling of Gear Box
12. Study of steering system


Continue Reading... Labels:


AE2406 AVIONICS LABORATORY LAB MANUAL


AE2406                                      AVIONICS LABORATORY                                         


OBJECTIVE
This laboratory is divided into three parts to train the students to learn about basic digital electronics circuits, programming with microprocessors, design and implementation of data buses in avionics with MIL - Std. 1553B and remote terminal configuration and their
importance in different applications in the field of Avionics.

LIST OF EXPERIMENTS
DIGITAL ELECTRONICS
Addition/Subtraction of binary numbers.
Multiplexer/Demultiplexer Circuits. Encoder/Decoder Circuits.
Timer Circuits, Shift Registers, Binary Comparator Circuits.
MICROPROCESSORS
Addition and Subtraction of 8-bit and 16-bit numbers. Sorting of Data in Ascending & Descending order. Sum of a given series with and without carry.
Greatest in a given series & Multi-byte addition in BCD mode.
Interface programming with 4 digit 7 segment Display & Switches & LED's.
16 Channel Analog to Digital Converter & Generation of Ramp, Square, Triangular wave
by Digital to Analog Converter.
AVIONICS DATA BUSES
Study of Different Avionics Data Buses.
MIL-Std - 1553 Data Buses Configuration with Message transfer.
MIL-Std - 1553 Remote Terminal Configuration.


Continue Reading... Labels:


AE2306 PROPULSION LABORATORY for 5th sem aeronautical engineering for anna niversity


AE2306                              PROPULSION LABORATORY                                   LTPC
0 03 2

OBJECTIVE
To understand the basic concepts and carryout experiments in Aerospace Propulsion.

LIST OF EXPERIMENTS



Study of an aircraft piston engine. (Includes study of assembly of sub systems,
various components, their functions and operating principles) Study of magneto and ignition system.
Study of an aircraft jet engine compressor.
Study of jet engine combustion chamber. Study of jet engine turbine.
Study of forced convective heat transfer over a flat plate.
Study of free convective heat transfer over a flat plate Study of free jet. Study of wall jet.

Study of ramjet. 
Continue Reading... Labels:


AE2305 AIRCRAFT STRUCTURES LAB - II manual for 5th sem aeronatical Engineering


AE2305                         AIRCRAFT STRUCTURES LAB - II                               LTP C
0 03 2
OBJECTIVE
To experimentally study the unsymmetrical bending of beams, find the location of shear
centre , obtain the stresses in circular discs and beams using photoelastic techniques,
calibration of photo - elastic materials and study on vibration of beams.

LIST OF EXPERIMENTS



Unsymmetrical bending of Z-section beams
Shear centre location for open channel sections
Shear centre location for closed D-sections
Constant strength beam
Flexibility matrix for cantilever beam
Beam with combined loading
Calibration of Photo- elastic materials
Stresses in circular discs and beams using photo elastic techniques
Determination of natural frequencies of cantilever beams
Wagner beam - Tension field beam

Continue Reading... Labels: ,


AE2207 THERMODYNAMICS LABORATORY lab manual for aeronautical engineering in anna university


AE2207                         THERMODYNAMICS LABORATORY     
                     
OBJECTIVE
To enhance the basic knowledge in applied thermodynamics

LIST OF EXPERIMENTS
Performance test on a 4-stroke engine
Valve timing of a 4 - stroke engine and port timing of a 2 stroke engine
Determination of effectiveness of a parallel flow heat exchanger


Determination of effectiveness of a counter flow heat exchanger
Determination of heating value of a fuel
COP test on a vapour compression refrigeration test rig
COP test on a vapour compression air-conditioning test rig
Determination of specific heat of solid
Determination of Thermal Conductivity of solid.

Determination of Thermal Resistance of a Composite wall. 
Continue Reading... Labels:


ME2208 FLUID MECHANICS AND MACHINERY LABORATORY lab manual for anna university for aeronatical engineering


ME2208           FLUID MECHANICS AND MACHINERY LABORATORY        LTPC
(Common to Aeronautical, Automobile, Mech & Prod)          0 03 2

OBJECTIVE
To study the flow measurement and the performance of fluid machinery

LIST OF EXPERIMENTS




Calibration of venturimeter
Pressure measurement with pitot static tube
Determination of pipe flow losses.
Verification of Bernoulli's theorem
Flow visualization by Heleshaw apparatus
Performance test on centrifugal pumps
Performance test on reciprocating pumps Performance test on piston wheel turbine
Performance test on Francis turbine
Determination of Viscosity of a Fluid


TOTAL: 45 PERIODS 
Continue Reading... Labels:


Strength of materials laboratory AE2206 lab manual for annuniversity aeronautical engineering


AE2206                         STRENGTH OF MATERIALS LABORATORY            LTPC
003 2

OBJECTIVE
To develop the knowledge in testing the materials for hardness, fatigue, impact, tension
and torsion.

LIST OF EXPERIMENTS
Brinell Hardness test
Rockwell Hardness test
Tension test
Torsion test
Izod Impact test
Charpy Impact test
Reverse plate bending Fatigue test
Rotating Beam Fatigue test
Testing of springs

Block Compression Test 
Continue Reading... Labels:


Subscribe to: Posts (Atom)
 
Return to top of page Copyright © 2010 | Flash News Converted into Blogger Template by HackTutors